@drone_newbie wrote:
Hello,
i have noticed in the last week that suddenly the GPS stopped working like it used to do. I always had a very good signal with HDOPs around 0.6 and Nstats around 16.
But the real problem now is that some times (often) the GPS cannot get a signal at all.
TOday it happened again.. SO I started my first flight in open air with the first battery and I had a 3D Fix with NSat around 12 and HDop around 1. In this flight my raspi camera was on and was recording. My camera and camera cable have that copped shield tape all around. I landed and then i continued my flight for a couple more minutes because i had some more battery juice left. Attached you can find the two log files from these two flights. first_flight.zip (4.4 MB) second_flight.zip (988.3 KB)So after landing i changed the battery in order to continue with another flight. (There is no log files for this session because i didnt even managed to get my copter to armed state). As soon as I powered my Navio2, I had a HDOP of 100 and NSats 0. After some time it managed to get HDOP 2 AND NSats 4.. I waited but the values remained the same. I restarted Navio2 two times but always the same..I should mention that my rasperry camera was off !!!
This erratic behavior happens the last week and it is so annoying .. I cannot understand what is happening and i cannot identify the source of this problem because sometimes it happens and sometimes it does not. I am using your latest image and arducopter v3.4.6
Please give me your help on this issue..Best Regards,
Posts: 1
Participants: 1