Calibrating Altitude?
@Nathan_Belk wrote: I'm wondering if I'm missing a step for altitude. I've having fluctuations with the altitude that makes flight plans and other modes that use altitude a little nerve wracking. For...
View Article[SOLVED] GUI for Navio-pi
@Alex wrote: I've been trying to get a GUI running on my windows from the pi Via WiFi but unfortunately that didn't work. I understand that navio-pi distribution is intended for embedded system and I...
View ArticleOpenCV--Is NAVIO+ the right board?
@Aaron_Ryan wrote: Hello All, I am starting a rover project that will require the use of OpenCV libraries to do object recognition. At first glance, the NAVIO+ seems to be an easy way to handle the...
View Article[SOLVED] Using RTKLIB on a RasPi with NAVIO+
@midoy192 wrote: I am using a Raspberry Pi B+ to run RTKLIB. I have followed the instructions to connect the Raspberry Pi and NAVIO+ using the GPIO pins and the header from here:...
View ArticleRtklib not outputing rtcm?
@matthewbrooks wrote: I have a ublox m8n serial input into windows rtklib. I am trying to postprocess the location to get the precise location of a base station. I have used the strsvr to convert the...
View ArticleReach + required components
@nuballawalla wrote: Total noob here, apologies in advance… I have a balloon camera rig that I use for coastal mapping. Reach sounds like an obvious addition to my setup. However, it's not clear to me...
View ArticleProblem to start ArduCopter-quad
@vvserpent wrote: Hi, I have got my Navio+ and installed on a Raspberry Pi 2B today. I have installed the Raspbian , apm.deb manually.When I start the ArduCopter-quad , the system prompt me Raspberry...
View ArticleAPM connection -same topic
@Maysun_Hassanaly wrote: Sorry I had to create a new topic because I couldn't reply on the post for some reason. Yes I connect it via SSH. The console just says " Raspberry Pi 1 with BCM2708!" and APM...
View ArticleNavio+ Hardware configuration question
@CavP28 wrote: what does: "Only one ESC central wire should be connected to Navio+ otherwise BECs built in ESCs will heat each other." actually means? Posts: 6 Participants: 5 Read full topic
View ArticleNAVIO+ and RAW data output
@izy wrote: Hi all, Could someone please give me a step by step guide on how to capture RAW GPS data from the NAVIO+, convert to RINEX and then post process using RTKLIB or any other suitable tool? I...
View ArticlePPM Encoder-Turnigy Receiver
@Maysun_Hassanaly wrote: I am trying to connect the PPM Encoder to the channel receiver, but when I launch APM it does not detect the radio. I think it might have to do with binding the radio , I read...
View ArticleClik here to view.
Some motors start with more speed than others
@Grek wrote: Hi Team Today I made some Indoor tests in order to verify the voltage and amperes with the battery but I observed that the speed on all motors are not the same for my quad´s...
View ArticleNavio Examples and APM not working
@Maysun_Hassanaly wrote: Hello, I think I might have an issue with the Navio+. After re setting up everything I got this i@navio-rpi ~ $ sudo ./ArduPlane.elfRaspberry Pi 1 with BCM2708!Raspberry Pi 1...
View ArticleClik here to view.
Reach manufacturing update 2
@ivereninov wrote: Originally published at: http://www.emlid.com/5219-2/Hi all,Hooray! We finally have the Edisons!As well as Tallysman antennas and wire packs.Now, we are waiting for U-blox modules...
View ArticleClik here to view.
[SOLVED] Barometer.py showing random temp and pressure values
@Michael_Steinweber wrote: Hi! I just got my brandnew Navio+ board, installed the latest stable APM and Navio examples. By running Navio/Python/Barometer.py the script shows me bad values: What's...
View ArticleConnection RC receiver-PPM encoder
@Maysun_Hassanaly wrote: Hi all,What are the 3 wire cables connected to the PPM encoder from the channel receiver called ? Is it possible to connect those two devices with single cables ? Cheers...
View ArticleIssues with building APM from sources and failing
@Kevin_Goff wrote: Attempting to build APM---below is a copy and paste. What am I doing wrong? I checked out navio as per the instructions in http://docs.emlid.com/Navio-APM/building-from-sources/...
View ArticleClik here to view.
Skywalker X5
@Maysun_Hassanaly wrote: Hey guys, I'm building on a Skywalker X5 and I'd like your opinion for my electrical diagram. Have a look and let me know what you think and if i should correct anything !...
View ArticleRTKLIB Timestamp Post Processing
@Sam_Thomas wrote: Could anybody point me in the right direction for some info on post processing a position from a timestamp and raw data with RTKlib?I would like to start looking into this while...
View ArticleLatency transmitter/receiver/engines
@unitech wrote: Hi, I recently received a Navio+ that I linked to a Raspberry PI 2. I have a Radiolink radio command with R9D receiver (PPM capable). Before linking it to Navio+ I already used a PX4...
View Article/pic9814888.png)
/fit-in/580x348/filters:format(webp)/english-betterindia/media/media_files/2026/09/17/balaghat-4-2026-09-17-19-01-31.png)
